Optic- Image Testing > Reticles / 標線 > Reticles with Angle Tolerances / 具角度公差的標線

Reticles with Angle Tolerances / 具角度公差的標線

Applications

＊Fast cheaking of wedges and plane-parallel plates.
Each pinhole allows for checking two angles given by:
＊Diameter oh the pinhole
＊Cross size (twice the pinhole dimeter) These reticels are recommended for testing of
large production quantities on "go" "no go" basis.
＊Alignment of optical systems
＊Measurement ofradii of curature

RECOMMANDATIONS
＊Eyepiece Reticle: RET-50, RET-51
＊Collimator Reticle : pinhole with cross RET-53...59

Preferred Combinations
＊RET-50/ret-59
＊Ret-51/RET-53...RET-58

應用
＊快速確認楔型和平板平行度. 每個針孔可確定兩個角度:
＊針孔直徑
＊十字線大小 (針孔直徑的兩倍)
＊這些標線建議用來測試大量生產時判定 "佳", "不良" 的基礎.
＊光學系統的對光
＊量測曲率半徑

建議
＊目鏡標線: RET-50, RET-51
＊具十字標線的準直器 RET 53..59

建議組合
＊ RET-50/RET-59
＊ RET-51/RET-53…RET-58

Product
Specification
Document
Feedback

No.	Name	Price	Add to Shop Cart
RET-50	Reticles with Angle Tolerances	TWD 0	Add
RET-51	Reticles with Angle Tolerances	TWD 0	Add
RET-53	Reticles with Angle Tolerances	TWD 0	Add
RET-54	Reticles with Angle Tolerances	TWD 0	Add
RET-55	Reticles with Angle Tolerances	TWD 0	Add
RET-56	Reticles with Angle Tolerances	TWD 0	Add
RET-57	Reticles with Angle Tolerances	TWD 0	Add
RET-58	Reticles with Angle Tolerances	TWD 0	Add
RET-59	Reticles with Angle Tolerances	TWD 0	Add

	Auto CAD PDF	Auto CAD DXF	Solidworks	eDrawing	Step	Manual	SpecSheet	MFG Spec	MSDS	CatalogPage	RoHS
RET-50
RET-51
RET-53
RET-54
RET-55
RET-56
RET-57
RET-58
RET-59