* Used in Video Imaging and Microscopy
* Microprocessor-Controlled Motion Profile
* USB, RS-232, TTL or Manual Control
* Rated for Millions of Cycles of Actuation
* 25 and 35mm Aperture Shutters Available
Our stepper-motor driven shutters provide fast and accurate exposures and are ideal for microscopy and machine vision applications.
The controller allows programmable control over the ex-posure time and the delay between trigger and shutter opening.
The controller contains a three-position switch, which allows the shutter to manually open and close or be remotely controlled.
RS-232, USB and TTL inputs can be used for remotely controlling the shutter. A TTL output line located in the rear panel of the controller allows for cascading the trigger input signal to another device.
The interface software allows selection among three modes of operation: Fast, Soft and Variable Aperture (Neutral Density) Mode.
The shutter can be configured to close and reopen repeatedly or loop for a specific number of cycles. The shutter consists of a single blade made of bare aluminum.
The 25mm shutter can be mounted either through its C-Mount threads or via its 8-32 tapped hole at the base. The 35mm shutter uses T-mount threads for mounting.
* 使用在視訊成像和顯微鏡
* 微處理器-控制運動
* USB, RS-232, TTL 或手動
* 數百次變電循環
* 提供25 和 35mm 遮斷開關
我們的步進馬達驅動之遮斷器 提供快速準確的曝光適用於顯微鏡和視訊應用.
控制器在曝光時間內和觸發與遮斷啟動的延遲時可程控.
控制器包含三個位置的切換, 讓遮斷器可以手動開關遙控.
RS-232, USB和 TTL輸入可用來遙控遮斷器.
前控制面板上的TTL 輸出線可以串接觸發訊號到其他元件.
軟體介面可以在3個操作模式中選擇: 快速, 安穩和可調光圈 (衰減) 模式.
遮斷器可組織成重複開關或特定數目的迴圈.
遮斷器由一個鋁片構成. 25mm 的遮斷器可藉由C-Mount 鎖住或由8-32洞鎖在基座上. 35mm的遮斷器使用T-mount鎖.
