This model is designed to use a threaded ring for holding 1 inch optics firmly in place.
Special for thin(0.1~4mm) 1 inch (25.4mm) diameter optics. The axes are easily adjusted by two fine-tune thumbscrews, and the 2 POM thin plates reduce the abrasion of optics or components.
* For any thin 1 inch (25.4mm) diameter optics and components
* Lock the optics with retaining ring.
* Precision M6 x 0.25mm adjuster screw
* ±3.5° tilt range
* 2 POM thin plates designed to safety secure the mounting of optics
此產品用螺絲環將1 inch的光學零件牢固在位置上。
特別適合用於厚度(0.1~4mm)直徑1 inch (25.4mm)的零件。
用兩微調螺絲可輕鬆調整軸且兩 POM支持點可減少磨損。
* 適用任何直徑1 inch (25.4mm)的零件
* 以固定環鎖定
* 以M6 x 0.25螺絲調動
* 傾斜度調整 ±3.5°
* 2個POM薄板設計以固定光學零件
